Omron CP1E CPU UNIT SOFTWARE User Manual page 208

12 Pulse Outputs
Preparations
PLC Setup
Enable using built-in input IN4 as an interrupt input.
Note The interrupt input setting is read from the PLC Setup when the power supply is turned ON.
DM Area Settings
• Speed Control Settings to Feed Wrapping Material to Initial Position
Acceleration/deceleration rate:
500 Hz/4 ms
Target frequency: 10,000 Hz
• Positioning Control Settings for Wrapping Material
Acceleration rate: 500 Hz/4 ms
Deceleration rate: 500 Hz/4 ms
Target frequency: 10,000 Hz
Number of output pulses: 5,000
pulses
Starting frequency: 0 Hz
12-40
Setting
Setting Address
D0
D1
D2
Setting Address
D10
D11
D12
D13
D14
D15
D16
D17
Data
#01F4
#2710
#0000
Data
#01F4
#01F4
#2710
#0000
#1388
#0000
#0000
#0000
CP1E CPU Unit Software User's Manual(W480)