Programming Devices Usable With The Cp1E - Omron CP1E CPU UNIT SOFTWARE User Manual

18 Programming Device Operations
18-1 Programming Devices Usable with
the CP1E
The Programming Devices that can be used with the CP1E are listed in the following table.
Product
CX-Programmer WS02-CXPC
1-V8
(CX-One)
WS02-CXPC
1-V9
Micro PLC Edition WS02-CXPC
CX-Programmer 2-V8
(CX-One Lite)
WS02-CXPC
2-V9
CX-Programmer WS02-CXPC
for CP1E 3
Note 1 To use CX-Programmer version 8.2 with a CP1E CPU Unit, the CX-One version 3 auto-update must be
installed.
2 Use the CX-Programmer version 9.12 or higher, when CP1W-CIF41 is applied.
Precautions for Correct Use Precautions for Correct Use
• This section describes the unique applications and functions of the Micro PLC Edition CX-Pro-
grammer version 9.03 or higher/CX-Programmer for CP1E. In the remainder of this section,
"CX-Programmer" refers to the Micro PLC Edition CX-Programmer version 9.03 or higher/
CX-Programmer for CP1E.
• When using the full version of CX-Programmer provided in CX-One, refer to the CX-Program-
mer Operation Manual (Cat. No. W446).
• A Programing Console cannot be used for the CP1E. Use the CX-Programmer.
• The CX-Programmer for CP1E and CX-Programmer (CX-One/CX-One Lite) can be used at the same time.
• The CX-Programmer (CX-One/CX-One Lite) and the CX-Programmer for CP1E can be installed on
the same computer and both applications can be run at the same time.
Using Project Files Saved with the CX-Programmer (.CXP) on the
CX-Programmer for CP1E
The CX-Programmer for CP1E cannot open a .CXP project created on the CX-Programmer
(CX-One/CX-One Lite). Use programming from a project saved in a .CXP file on the CX-Program-
mer for CP1E according to the following procedure.
1
Start the CX-Programmer (CX-One/CX-One Lite) and CX-Programmer for CP1E together.
2
Copy the rungs of the program to be used from the Ladder Programming Window of the CX-Pro-
grammer (CX-One/CX-One Lite), and paste them into the CX-Programmer for CP1E.
Additional Information
Files created with the CX-Programmer for CP1E (.CXE) can be opened with CX-Programmer
version 8.2 and higher.
18-2
Compatible
Unit version of
Model CX-Programmer
CP1E CPU Unit
versions
Version 8.2 or Version 1.
higher (See note.)
Version 9.03 or Version 1.
higher
Version 8.2 or Version 1.
higher
Version 9.03 or Version 1.
higher
Version 1.0 Version 1.
Saved pro-
Support for
gram file Reference
Smart Input
extension
Not .CXP Refer to the
supported CX-Programmer
Operation Manual
(Cat. No. W446).
Supported
Not .CXP Described in this
supported section.
Supported
Supported .CXE
CP1E CPU Unit Software User's Manual(W480)
Applicable
CPU Unit
CP1E- 20D -
CP1E- 30D -
CP1E- 40D -
All units are
supported
CP1E- 20D -
CP1E- 30D -
CP1E- 40D -
All units are
supported
CP1E- 20D -
CP1E- 30D -
CP1E- 40D -