Table of Contents
Advertisement
Camera menu items (continued)
PRESET
PRESET SPEED UNIT [SPEED TABLE, TIME]
When reproducing the information such as camera direction
registered in the preset memory, you can select whether to specify
the playback time by speed or by time.
SPEED
Specify the speed when playing during preset playback.
TABLE
TIME
Specify the time when playing during preset playback.
PRESET SPEED TABLE [SLOW, FAST]
Set the preset speed table (SLOW, FAST). During preset playback,
presets are performed at [PRESET SPEED] (1 to 30) values that are
based on the table set here.
This is only enabled when [PRESET SPEED UNIT] is set to [SPEED
TABLE].
PRESET SPEED [1 to 30 / 1s to 99s]
When [PRESET SPEED UNIT] is [SPEED TABLE]: [1 to 30]
Set the pan/tilt operation speed in 30 steps when playing back the
preset memory.
<NOTE>
• When you set large [PRESET SPEED] values, the image may
sway when the movement stops.
When [PRESET SPEED UNIT] is [TIME]: [1s to 99s]
Set the pan/tilt operation time between 1 and 99 seconds when
playing back the preset memory.
<NOTE>
• Depending on the movement distance of pan/tilt, there may be a
difference compared to the specified time.
PRESET ACCELERATION SETTING
Displays the advanced setting screen for setting acceleration speed
when starting/stopping preset playback.
PRESET ACCELERATION [MANUAL, AUTO]
MANUAL
Makes the advance settings for acceleration speed etc.
when starting/stopping preset playback.
AUTO
Automatically operates acceleration speed etc. when
starting/stopping preset playback.
RISE S-CURVE [0 to 30]
Sets the S-curve for pan/tilt acceleration operation in 31 steps. (The
greater the number, the steeper the S-curve)
During the acceleration operation for operating at the specified
speed or time during pan/tilt operations by preset playback, the
acceleration process is performed using the S-curve specified in this
setting.
This is enabled only when [PRESET ACCELERATION] is
[MANUAL].
<NOTE>
• In order to limit the acceleration response, in the S-curve step, as
the acceleration speed rises, the limit is automatically applied.
FALL S-CURVE [0 to 30]
Sets the S-curve for pan/tilt deceleration operation in 31 steps. (The
greater the number, the steeper the S-curve)
During the deceleration operation for operating at the specified
speed or time during pan/tilt operations by preset playback, the
deceleration process is performed using the S-curve specified in this
setting.
This is enabled only when [PRESET ACCELERATION] is
[MANUAL].
<NOTE>
• In order to limit the deceleration response, in the S-curve step, as
the deceleration speed rises, the limit is automatically applied.
• For the relationships between the various setting values in
[PRESET ACCELERATION], refer to the diagram on page 79,
80.
RISE ACCELERATION [1 to 255]
Sets the acceleration speed for pan/tilt acceleration operation in 255
steps. (The acceleration speed increases as the number increases.)
During the acceleration operation for operating at the specified
speed or time during pan/tilt operations by preset playback, the
acceleration process is performed using the acceleration speed
specified in this setting.
This is enabled only when [PRESET ACCELERATION] is
[MANUAL] and [PRESET SPEED UNIT] is [SPEED TABLE].
<NOTE>
• As the speed specified for [PRESET SPEED] is given priority
as the maximum speed attained in preset playback, if the
acceleration speed specified here is small, this functionality may
not operate as specified.
FALL ACCELERATION [1 to 255]
Sets the deceleration speed for pan/tilt deceleration operation in 255
steps. (The deceleration speed increases as the number increases.)
During the deceleration operation for operating at the specified
speed or time during pan/tilt operations by preset playback, the
deceleration process is performed using the deceleration speed
specified in this setting.
This is enabled only when [PRESET ACCELERATION] is
[MANUAL] and [PRESET SPEED UNIT] is [SPEED TABLE].
<NOTE>
• As the speed specified for [PRESET SPEED] is given priority
as the maximum speed attained in preset playback, if the
deceleration speed specified here is small, this functionality may
not operate as specified.
RISE RAMP TIME [0.1s to 10.0s]
Sets the acceleration time for the time specific operation during
preset playback. (Sets between 0.1s to 10.0s in 0.1s increments)
This is enabled only when [PRESET ACCELERATION] is
[MANUAL] and [PRESET SPEED UNIT] is [TIME].
<NOTE>
• As the time specified in [PRESET SPEED] takes precedence
as the total time for preset playback, if the time specified here is
more than half of the time specified in [PRESET SPEED], this
functionality will not operate as specified.
• When the acceleration operation cannot be performed within the
specified time even at maximum acceleration speed of the device,
the operation will not be performed by the specified time.
FALL RAMP TIME [0.1s to 10.0s]
Sets the deceleration time for time specified operations during
preset playback. (Sets between 0.1s to 10.0s in 0.1s increments)
This is enabled only when [PRESET ACCELERATION] is
[MANUAL] and [PRESET SPEED UNIT] is [TIME].
<NOTE>
• As the time specified in [PRESET SPEED] takes precedence
as the total time for preset playback, if the time specified here is
more than half of the time specified in [PRESET SPEED], this
functionality will not operate as specified.
• When the deceleration operation cannot be performed within the
specified time even at maximum fall deceleration of the device, the
operation will not be performed by the specified time.
PRESET SCOPE [MODE A, MODE B, MODE C]
Selected here are the setting items to be recalled when the contents
of the preset memory are regenerated.
MODE A
PAN, TILT, ZOOM (including digital zoom), FOCUS,
IRIS, GAIN, SHUTTER, white balance adjustment value
MODE B
PAN, TILT, ZOOM (including digital zoom), FOCUS, IRIS
MODE C
PAN, TILT, ZOOM (including digital zoom), FOCUS
77
Advertisement
Table of Contents
