Table of Contents
Advertisement
Web screen configurations (continued)
Client certificate type [PEM, PKCS#12]
Makes settings for the client certificate method used with TLS
authentication.
This unit supports the PEM and PKCS#12 methods.
<NOTE>
• When a private key is to be used, the private key information must
be included in the client certificate.
Set [Private Key password usage] to [Enable] and set the correct
password.
• When installing a client certificate with the PKCS#12 method, it is
necessary to set [Private Key password usage] to [Enable] and to
set the correct password.
• If the PKCS#12 method is selected, the PKCS#12 password and
the [Private Key password] need to match.
Private Key password usage [Enable, Disable]
Sets whether to use a private key in the client certificate.
Enable
Select when a private key is to be used.
Disable
Select when a private key is not to be used.
<NOTE>
• If [Enable] is selected, the correct value needs to be set for [Private
Key password].
Private Key password
Makes settings for the password set in the private key.
<NOTE>
• When installing a PKCS#12 method client certificate, enter the
same password as the one set for PKCS#12.
TLS User name
Sets a user name permitted by TLS authentication.
<NOTE>
• Consult the network administrator regarding valid user names.
Client certificate install
Installs the client certificate.
<NOTE>
• The client certificate installed must be the correct one issued by the
certificate authority.
• Before installing the certificate, check that the settings for [Client
certificate type], [Private Key password usage], and [Private Key
password] have been completed.
The certificate may not be installed correctly if the above settings
have not been completed.
PEAP
Makes settings for when the PEAP authentication method is used.
User name
Sets a user name permitted by PEAP authentication.
<NOTE>
• Consult the network administrator regarding valid user names.
Password
Sets the password attached to the User name in PEAP
authentication.
<NOTE>
• Consult the network administrator regarding valid passwords.
CA Certificate install
Installs the CA certificate used in IEEE 802.1X authentication.
<NOTE>
• The CA certificate installed must be one issued by the correct
certificate authority.
z Easy IP Setup Tool Plus
Makes settings related to Easy IP Setup Tool Plus.
The setting is confirmed with the [Set] button.
Plain text usage [Enable, Disable]
Sets whether to encrypt the communications with Easy IP Setup Tool
Plus.
Factory settings: Disable
178
Advertisement
Table of Contents
