Table of Contents
Advertisement
Web screen configurations (continued)
„
Product information screen [Product info.]
The versions of the unit's software can be checked on this screen.
The [Model no.], [MAC address(LAN)], [MAC address(SFP+)], [Serial
no.], [Firmware version] and other information about the unit is
displayed.
Model no.
Display the unit's model number.
MAC address(LAN)
Display the MAC address of the LAN of this unit.
MAC address(SFP+)
Display the MAC address of the SFP+ of this unit.
<NOTE>
• This is not displayed when the [Basic Config] – [SFP+Mode] is [12G
Output].
Serial no.
Display the unit's serial number.
Firmware version
Display the overall system version of the unit.
Activation
Display information on the activated function.
Operation time
Display the hours the unit has been operating.
Viewer software installation counter
The number of plug-in viewer software applications which have been
installed automatically from the unit is displayed by this counter.
OSS license display
When you press the [View] button, the OSS license appears.
Press the [Close] button to close the OSS license display screen.
Firmware file
Upgrade the firmware.
For details on how to upgrade, see "Upgrading the firmware
(Firmware file)" (→ page 188).
z Upgrading the firmware (Firmware file)
1.
Download the latest software to your personal computer.
<NOTE>
• Keep the maximum combined number of characters to be used for
the name of the directory in which the software will be stored and for
the name of the software which has been downloaded to less than
250 characters.
2.
Click the [Select] button, and specify the downloaded
software.
3.
Click the [Execute] button.
The software upgrade check screen is displayed.
After upgrading the software version, be absolutely sure to delete the
temporary Internet files.
<NOTE>
• An upgrade progress bar appears after you click the [Execute] button,
and the process will take about 1 minute.
• Use the personal computer on the same subnet as the camera to
upgrade the software version.
• Before using the version upgrading software, be absolutely sure to
check the precautions to be observed, and follow the instructions.
• Use the following files specified by Panasonic Connect Co., Ltd. as the
software used for version upgrading.
UPDATE.bin
• While upgrading, the status display lamp of the unit appears as
follows:
- Blinking orange: files being transferred
- Blinking red: data being written
• Do not turn off the unit's power while a software version is being
upgraded. (A pop-up screen will appear to indicate that the process is
complete.)
• While a software version is being upgraded, do not attempt to execute
any other operations until the version has been upgraded.
• Close the web browser once after performing a version upgrade.
• A maximum of about one hour may be required to upgrade the
firmware of the unit.
• The web browser may freeze if version upgrading is performed with
Microsoft Edge (IE mode). The version upgrade continues even if this
happens, so do not turn off the power of this unit. Keep track of the
progress of the upgrade with the status display lamp of the unit (either
blinking orange or blinking red).
• If the version is upgraded while [DHCP] is [On], the IP address of
the unit may be changed after the restart of the unit after version
upgrading. If this occurs, the pop-up screen indicating completion
of the version upgrade will not be shown in the web browser, and a
timeout may occur. Use the status display lamp of the unit to confirm
that the version upgrade is complete.
188
Advertisement
Table of Contents
