Download Print this page
Panasonic AW-UR100 Firmware Update Procedure
Panasonic AW-UR100 Firmware Update Procedure

Panasonic AW-UR100 Firmware Update Procedure

Advertisement

Quick Links

AW-UR100 Firmware Update Procedure
Please be sure to read this first.
The update of AW-UR100 is performed via a network from Web setting screen on PC.
There might be accidents in the process of updating such as changing the settings and others by
mistake.
Please perform the update after taking every situation into careful consideration.
It is recommended that the current settings should be noted down in advance.
◆[ Disclaimer of warranty ]
IN NO EVENT SHALL Panasonic Corporation BE LIABLE TO ANY PARTY OR ANY PERSON, EXCEPT FOR
REPLACEMENT OR
REASONABLE MAINTENANCE OF THE PRODUCT, FOR THE CASES, INCLUDING BUT NOT LIMITED TO
BELOW.
(1)
ANY DAMAGE AND LOSS, INCLUDING WITHOUT LIMITATION, DIRECT OR INDIRECT, SPECIAL,
CONSEQUENTIAL OR EXEMPLARY, ARISING OUT OF OR RELATING TO THE PRODUCT.
(2) PERSONAL INJURY OR ANY DAMAGE CAUSED BY INAPPROPRIATE USE OR NEGLIGENT OPERATION
OF THE USER.
(3) UNAUTHORIZED DISASSEMBLE, REPAIR OR MODIFICATION OF THE PRODUCT BY THE USER.
(4) INCONVENIENCE OR ANY LOSS ARISING WHEN IMAGES ARE NOT DISPLAYED, DUE TO ANY REASON
OR CAUSE INCLUDING ANY FAILURE OR PROBLEM OF THE PRODUCT.
(5) ANY PROBLEM, CONSEQUENTIAL INCONVENIENCE, OR LOSS OR DAMAGE, ARISING OUT OF THE
SYSTEM COMBINED BY THE DEVICES OF THIRD PARTY.
(6)
ANY INCONVENIENCE, DAMAGES OR LOSSES RESULTING FROM ACCIDENTS CAUSED BY AN
INADEQUATE INSTALLATION METHOD OR ANY FACTORS OTHER THAN A DEFECT IN THE PRODUCT ITSELF.
(7) LOSS OF REGISTERED DATA CAUSED BY ANY FAILURE.
(8) ANY DAMAGE OR CLAIMS DUE TO LOSS OR LEAKAGE OF IMAGE DATA OR SETTING DATA SAVED ON
THIS UNIT OR ON A MEMORY CARD OR COMPUTER.
◆[ Network security ]
As connected to a network, your attention is called to the following security risks.
(1) Leakage or disclosure of information transmitted via this unit
(2)
Unauthorized use of this unit by a third person with malicious intent
(3)
Interference or stoppage of this unit by a third person with malicious intent
It is your responsibility to take sufficient network security measures such as those described below to
protect yourself against the above risks.
+ Use this unit in a network secured by a firewall, etc.
+ If this unit is used in a system with a computer connected, make sure that checks for and removal of
computer viruses and malicious programs are implemented regularly.
+ Do not install the unit in a location where the unit, cables, and other parts may be easily damaged.
Panasonic Connect Co., Ltd.
AW-UR100 Update Procedure / Oct 2023
1/8

Advertisement

loading

Summary of Contents for Panasonic AW-UR100

  • Page 1 AW-UR100 Firmware Update Procedure Please be sure to read this first. The update of AW-UR100 is performed via a network from Web setting screen on PC. There might be accidents in the process of updating such as changing the settings and others by mistake.
  • Page 2 AW-UR100 Update Procedure / Oct 2023 Preparing the update file Download the latest software to the hard disk of your PC from web site. https://eww.pass.panasonic.co.jp/pro-av/support/content/download/EN/ep2main/soft/ur100_note_e.htm Extract the downloaded zip file to hard disk of your PC. File name UPDATE.HDC [NOTE] Spaces and double-byte characters cannot be used for save directory.
  • Page 3 AW-UR100 Update Procedure / Oct 2023 Select an IP address for the personal computer within the private address range while ensuring that it is different from the address of the unit. Set the subnet mask to the same address as the unit.
  • Page 4 AW-UR100 Update Procedure / Oct 2023 Update procedure using EasyIPSetupToolPlus A list of cameras on the network is displayed. You can confirm the camera version here. 1. [Firmware Update] Panasonic Connect Co., Ltd.
  • Page 5 AW-UR100 Update Procedure / Oct 2023 2. [Auto] If your PC is connected to the internet, the application will identify PTZ cameras that need to be upgraded. In addition, all operations from the download of the firmware file to the version upgrade of the PTZ camera are performed by applications.
  • Page 6 AW-UR100 Update Procedure / Oct 2023 Update procedure using WEB Browser 1. Start your web browser and enter the IP address of the PTZ camera in the URL area. Example:192.168.0.10 1. [SETUP] 2. Enter the ID and PW set as the initial account.
  • Page 7 AW-UR100 Update Procedure / Oct 2023 5. The following screen for selecting a file is displayed. Specify the downloaded firmware file "UPDATE.HDC" and click the [Open] button. 6. [Execute] Push the button and push the [OK] button on the confirmation screen to start the update.
  • Page 8 AW-UR100 Update Procedure / Oct 2023 The update was not completed If you disconnected the LAN cable or the power supply during the update, please try again. [<!>Update is failed] - Please reconfirm the network settings, circumstances, ID and password.