Table of Contents
Advertisement
Web screen configurations (continued)
Digital Extender [Off, ×1.4, ×2.0]
Make settings for the digital extender function.
Off
Turn the digital extender function Off.
×1.4
The digital zoom will be fixed at 1.4×.
×2.0
The digital zoom will be fixed at 2.0×.
This is only enabled when [Zoom Mode] is set to [Opt.Zoom].
Factory settings: Off
O.I.S. Mode
[Off, O.I.S.(STABLE), O.I.S.(PAN/TILT), Hybrid(STABLE),
Hybrid(PAN/TILT)]
Sets the mode for optical image stabilization (O.I.S.) and roll direction
electronic image stabilization (E.I.S.).
Off
Turns the optical image stabilization (O.I.S.) function
and roll direction electronic image stabilization (E.I.S.)
function Off.
O.I.S.
Turns the optical image stabilization (O.I.S.) function On.
(STABLE)
Use with a pan/tilt fixed shooting scene.
O.I.S.
Turns the optical image stabilization (O.I.S.) function On.
(PAN/TILT)
Use with a scene for increasing the image stabilization
effect during a shooting while performing the pan/tilt
operation.
Hybrid
Turns the optical image stabilization (O.I.S.) function
(STABLE)
and roll direction electronic image stabilization (E.I.S.)
function On.
Use with a pan/tilt fixed shooting scene.
Hybrid
Turns the optical image stabilization (O.I.S.) function
(PAN/TILT)
and roll direction electronic image stabilization (E.I.S.)
function On.
Use with a scene for increasing the image stabilization
effect during a shooting while performing the pan/tilt
operation.
Factory settings: Off
<NOTE>
• In [O.I.S.(STABLE)] or [Hybrid(STABLE)] mode, the optical image
stabilization (O.I.S.) function's level of correction is reduced during
pan/tilt operations in order to minimize the convergence resulting
from image stabilization during pan/tilt operations.
• In [O.I.S.(PAN/TILT)] or [Hybrid(PAN/TILT)] mode, as importance
is given to heighten the image stabilization effect during pan/tilt
operations, the convergence resulting from image stabilization
during pan/tilt control may be a cause for concern in some scenes.
Use [O.I.S.(STABLE)] or [Hybrid(STABLE)] for scenes where
the convergence resulting from image stabilization needs to be
restrained.
ND Filter [Through, 1/4, 1/16, 1/64]
Set the transmittance of the lens' built-in ND (neutral density) filter.
The filter switches when the setting is fixed.
Through
Do not set ND filter.
1/4
Set ND filter transmittance to 1/4.
1/16
Set ND filter transmittance to 1/16.
1/64
Set ND filter transmittance to 1/64.
<NOTE>
• This is only enabled when [PAINT] – [GAIN SETTING] – [DAY/
NIGHT] is set to [DAY].
„
UHD crop setting screen [UHD Crop]
Crop Output PTZ
This is used for camera control. The same operations are possible
as with the camera controller operated in the live screen [Live].
(→ page 107)
Crop Mode [Off, Crop(720), Crop(1080)]
Sets the Crop function which crops UHD(3840×2160) images.
Off
No cropping.
Crop(720)
Cropped images output with 720 resolution.
Crop(1080)
Cropped images output with 1080 resolution.
Factory settings: Off
<NOTE>
• When [Crop Mode] is changed, IP video transmission is temporarily
stopped.
• Only when [2160/59.94p] or [2160/50p] is selected in [Basic
Config] – [Format] are [Off], [Crop(1080)], and [Crop(720)] available
for selection, and when [2160/60p], [2160/29.97p], [2160/25p],
[2160/24p] or [2160/23.98p] is selected, [Off] and [Crop(1080)] only
may be selected.
When other selections are made in FORMAT, this will be [Off].
• When [Crop Mode] is [Crop(720)] or [Crop(1080)], the following
values cannot be set in [Streaming mode].
H.264(UHD), U.265(UHD), JPEG(UHD), RTMP(UHD), SRT(H.264
UHD), SRT(H.265 UHD), NDI|HX V2(UHD)
(→ page 125)
• When H.264(UHD), U.265(UHD), JPEG(UHD), RTMP(UHD),
SRT(H.264 UHD), SRT(H.265 UHD) or NDI|HX V2(UHD) is selected
in [Streaming mode] and [Crop Mode] is switched to [Crop(720)] or
[Crop(1080)], the [Streaming mode] setting changes to [H.264].
• When [Crop Mode] is [Crop(720)] or [Crop(1080)], [Zoom Mode] is
disabled and functions as [Opt.Zoom].
Crop AF [OFF, ON]
Make settings about whether to run AF on images within the crop
frame.
This is only enabled when [Crop Mode] is set to [Crop(720)] or
[Crop(1080)].
158
Advertisement
Table of Contents
