Panasonic HEVC Advance AW-UE160WP Operating Instructions Manual page 174

Web screen configurations (continued)
CA Certificate ‑ Generate Certificate Signing Request
When using a security certificate issued by the Certificate Authority
(CA) as a security certificate for HTTPS, a Certificate Signing Request
(CSR) is generated for application to the Certificate Authority (CA).
To generate a Certificate Signing Request (CSR), click the [Execute]
button to display the [CA Certificate - Generate Certificate Signing
Request] dialog and perform the operation.
For details, refer to "Generating a Certificate Signing Request (CSR)"
(→ page 181).
CA Certificate ‑ CA Certificate install
This displays information relating to server certificates (security
certificates) issued by the Certificate Authority (CA), which are to be
or are already installed.
In the [File Open] dialog, which is displayed by clicking the [Select]
button, select the file of the server certificate (security certificate)
issued by the Certificate Authority (CA) and click the [Execute] button
to install the server certificate (security certificate).
If the server certificate (security certificate) is installed, its file name
will be displayed.
For details, refer to "Installing a Server Certificate" (→ page 182).
CA Certificate ‑ Information
This displays information relating to the server certificate (security
certificate).
When the [Confirm] button is clicked, the registered content of the
installed server certificate (security certificate) is displayed in the
[Server Certificate - Confirm] dialog, If the server certificate (security
certificate) is not installed, the content of the generated Certificate
Signing Request (CSR) is displayed.
Click the [Delete] button to delete the installed server certificate
(security certificate).
<NOTE>
• To delete an enabled server certificate (security certificate),
confirm that there is a backup to the said certificate in your
personal computer or recording media. A server certificate (security
certificate) will be needed to reinstall it.
Connection [HTTP, HTTPS]
This sets the method to connect to the unit.
HTTP Only HTTP connection is possible.
HTTPS Only HTTPS connection is possible.
Factory settings: HTTP
For details, refer to "Setting the Connection Method" (→ page 183).
<NOTE>
• When using an HTTPS connection, network connection with the
AW-RP120, AW-RP50, and AK-HRP200 will be disabled.
HTTPS port [1 to 65535]
This sets the Port No. to be used with HTTPS.
The following port numbers are used by the unit so they cannot be
used.
20, 21, 23, 25, 42, 53, 67, 68, 69, 80, 110, 123, 161, 162, 546, 547,
554, 995, 5960 to 5985, 7960 to 8060, 10669, 10670, 11900, 59000
to 61000
Factory settings: 443
<NOTE>
• This unit will restart if the connection method is changed.
• When using a self-signed certificate:
A warning screen is displayed when accessing the camera by
HTTPS for the first time. Install the self-signed certificate (security
certificate) in your personal computer in accordance with the screen
instructions. (→ page 184)
• When using a server certificate:
Install the Certificate Authority (CA) root certificate or intermediate
certificate in your web browser in advance.
Follow the Certificate Authority (CA) procedures to acquire and
install root certificates and intermediate certificates.
• When accessing the camera by HTTPS, the image display speed
and frame rate of the moving image may reduce.
• When accessing the camera by HTTPS, it may take some time for
the images to be displayed.
• When accessing the camera by HTTPS, images may be disturbed
and sound may be interrupted.
• The maximum number of cameras that can be connected
simultaneously depends on the maximum image size and
distribution format.
HTTPS mode [TLS1.0/1.1/1.2/1.3, TLS1.2, TLS1.3]
This sets the encryption protocol when accessing the camera with
HTTPS.
Permits connection with TLS1.0/1.1/1.2/1.3 when
TLS1.0/1.1/1.2/1.3
HTTPS is enabled.
Permits connection with TLS1.2 when HTTPS is
TLS1.2
enabled.
Permits connection with TLS1.3 when HTTPS is
TLS1.3
enabled.
Factory settings: TLS1.2
174