Table of Contents
Advertisement
Web screen operations (continued)
13.
Control pad and its buttons
To adjust the image in the horizontal or vertical
direction (panning or tilting), left-click the pad and
the buttons.
It is possible to operate with the central grid
pattern in the dragged state, with the speed of the
pan/tilt increasing as it approaches the outside of
the pad.
14.
Brightness [Iris]
[+]: Operates in stages in the direction of iris
opening. It does not work during automatic
adjustments.
[–]: Operates in stages in the direction of iris
closing. It does not work during automatic
adjustments.
The F value is displayed in the center.
[+] [–]
Use this to switch the iris adjustment between
auto and manual. When Auto is selected, the
[Auto]
picture brightness is adjusted automatically.
15.
Speed [Speed]
Use this to select the speed at which the pan, tilt,
zoom, and focus operations are to be performed.
The speed of pan/tilt operation is reflected in
control pad operations. It is not reflected in grip
button operations.
[Fast] [Slow]
16.
Preset [Preset]
When a preset thumbnail is clicked, the camera
moves to face towards a preset position that was
registered beforehand.
You can select [Home] and [Preset1] to
[Preset100].
Preset numbers are displayed in green when
they have had a preset position registered in
them.
Preset names are displayed.
During the preset registration mode, you can
select a preset name and change the display
name.
(Preset name)
You can enter between 1 to 15 characters.
The characters available are 0 to 9, A to Z, a to
z, spaces, and underscores ( _ ).
Switches the page of the displayed preset
thumbnails.
[1] - [12]
Move to home position.
[Home]
Display button for preset expansion panel
The [SET] and [DEL] buttons for presetting are
displayed.
The display changes to [–] while these are
displayed, and they stop being displayed when
this is pressed again.
The unit moves to the preset registration mode.
When a preset thumbnail is clicked in the preset
registration mode, it is registered in the preset
[SET]
position specified by the current condition.
The unit moves to the preset delete mode.
When a preset thumbnail is clicked in the preset
delete mode, the specified preset position
[DEL]
settings are deleted.
<NOTE>
• If the [Preset Thumbnail Update] menu is [Off] when registering
presets, the previously registered preset thumbnail is maintained.
• If the [Preset Name] menu is [Reset] when registering presets, the
previously registered preset name is reset.
• The [SET] and [DEL] buttons are not displayed immediately after the
live screen [Live] is displayed. They are displayed when the [Display
button for preset expansion panel] is pressed.
17.
Scene/User [Scene/User]
[Scene1] to [Scene8], [User1] to [User3]
Select [Scene1] to [Scene8] or [User1] to [User3] to switch the shooting
mode.
Expansion panel display button for Scene/User
Display the pull-down menu for switching scene/user files.
The button changes to [–] while the menu is being
displayed, and the menu is hidden again when you press
the button again.
<NOTE>
• Immediately after displaying the live screen [Live], the pull-down
menu for switching scene/user files is not displayed. It is displayed
when the [Expansion panel display button for Scene/User] is
pressed.
18.
Full‑screen display button
Display the image in full-screen mode.
To return to the live screen [Live], press the [Esc] key on
the personal computer while the image is displayed in
full-screen mode.
The aspect ratio of the displayed image will be adjusted
according to the monitor size.
19.
Snapshot button
Capture a snapshot (single still image), and display it in a
separate window.
<NOTE>
• Depending on the network environment, for example, if snapshot
capture takes longer than a certain amount of time, the image may
not appear.
• If [JPEG transmission(1)] - [JPEG transmission(3)] (→ page 126)
are all set to [Off], the image captured with the snapshot button will
be black.
20.
Camera title display area
The name for the unit configured in [Camera title] in [Live page] in the
System screen [System] (→ page 119) appears.
21.
Gain [Gain]
Increase the gain of the images.
Decrease the gain of the images.
<NOTE>
• The current setting is displayed in the middle of the button.
108
Advertisement
Table of Contents
