Advanced Operations; Preset Memories - Panasonic AW-HE20KP Operating Instruction

Advanced Operations

In the following will description more operations and setting of the camera unit.

Preset Memories

The camera unit enables up to 100 settings for the camera direction (panning and tilting), zoom to be registered in its
preset memories, and called. However, the number of settings that can be registered and called depends on the type
of wireless remote control or controller that is used for operation.
[Note]
 The recalling of a preset can be performed while the recalling of a preset can be performed while manual operations,
such as pan, tilt, zoom.
 Nothing will occur if a preset memory number to which a preset has not been registered is recalled.
When performing the operations using the wireless remote control
Twelve settings (preset No.1 to No.12) can be registered and called using the wireless remote control.
The [1] to [12] buttons correspond to the unit's preset memories No.1 to No.12.
Registering the settings in the preset memories

1 Display the picture to be shot on the monitor. Operate the pan, tilt or zoom buttons to determine the camera
view.
2 While holding down the [PRESET] button, press the button corresponding to the preset memory number.
If a preset memory number with an already registered setting has been selected, the existing setting will be erased
and replaced with the new one.
Calling the settings of the preset memories

Press the button in which the preset memory setting has been registered.
When performing operations from a controller (AW-RP60/AW-RP150).
UP to 100 entries can be registered/recalled.
For details, refer to the operating instructions for the controller.
43