Table of Contents
Advertisement
Web screen configurations (continued)
Preset
The setting is confirmed with the [SET] button.
When a preset thumbnail is clicked, the camera
moves to face towards a preset position that
was registered beforehand.
You can select [Home] and [Preset001] to
[Preset100].
Preset numbers are displayed in green when
they have had a preset position registered in
them.
Preset names are displayed.
During the preset registration mode, you can
select a preset name and change the display
name.
(Preset name)
You can enter between 1 to 15 characters.
The characters available are 0 to 9, A to Z, a to
z, spaces, and underscores ( _ ).
Switches the page of the displayed preset
thumbnails.
[1] - [12]
Move to home position.
[Home]
The unit moves to the preset registration mode.
When a preset thumbnail is clicked in the preset
registration mode, it is registered in the preset
[SET]
position specified by the current condition.
The unit moves to the preset delete mode.
When a preset thumbnail is clicked in the preset
delete mode, the specified preset position
[DEL]
settings are deleted.
Acquire JPEG images (still images) and save them.
They can be saved by specifying [PICT001] to [PICT100] or [STIL001] to
[STIL005] in the save destination.
If [PICT
] is selected, the thumbnail image for the corresponding preset
***
number can be updated, and if [STIL001] to [STIL005] is selected, you can
save still images with a higher resolution.
Furthermore, when [STIL001] to [STIL005] have been selected, the [Load]
and [DEL] buttons are activated and it is possible to load and delete the still
images you have saved.
[Save]
z Limitation Setting
This establishes the up, down, left and right limit settings of the pan-tilt
head.
First, use the control pad to rotate the pan-tilt head to the position you
want to set as the limit.
After the limit position has been selected, click the buttons
corresponding to the following items to confirm.
The setting is cleared if the button is pressed again.
Tilt Up
Use this to save the current position as the upward limit.
Tilt Down
Use this to save the current position as the downward limit.
Pan Left
Use this to save the current position as the leftward limit.
Pan Right
Use this to save the current position as the rightward limit.
z Pan/Tilt Lens Control
This is used for camera control. The same operations are possible
as with the camera controller operated in the live screen [Live].
(→ page 107)
161
Advertisement
Table of Contents
