Panasonic HEVC Advance AW-UE160WP Operating Instructions Manual page 145

Web screen configurations (continued)
z W/B BAL SETTING
ATW [Off, On]
Set the behavior of the auto tracking white balance function.
When set to [On], the white balance is continuously and automatically
adjusted, with compensation done automatically even if the light
source and color temperature change.
WHITE BALANCE MODE
[AWB A, AWB B, 3200K, 5600K, VAR]
Set the white balance mode.
Select the mode when the coloring is not natural because of the
nature of the light source or other factors.
If the white color serving as the reference can be recognized, subjects
can be shot with natural coloring.
AWB A When [AWB A] or [AWB B] is selected and the white
AWB B balance is executed, the adjustment results obtained
are stored in the memory selected. When [AWB A] or
[AWB B] is then selected, the white balance stored in the
selected memory can be recalled.
3200K This is the white balance mode which is ideal when a
3200K halogen light is used as the light source.
5600K This is the white balance mode which is ideal when
5600K sunlight or fluorescent lighting is used as the light
source.
VAR You can specify a color temperature between 2000K to
15000K.
Factory settings: AWB A
W.BAL VAR
You can specify a color temperature between 2000K to 15000K.
Factory settings: 3200K
ATW Speed [Slow, Normal, Fast]
Set the control speed of the ATW function.
Slow Tracks at a speed slower than [Normal].
Normal Tracks at normal speed.
Fast Tracks at a speed faster than [Normal].
Its setting takes effect when [On] has been selected as the [ATW]
setting.
Factory settings: Normal
ATW TARGET R [–10 to +10]
Make fine adjustments to the Rch output when converging with the
auto tracking white balance operation.
Factory settings: 0
ATW TARGET B [–10 to +10]
Make fine adjustments to the Bch output when converging with the
auto tracking white balance operation.
Factory settings: 0
SHOCKLESS WB SW [OFF, ON]
Set the control that either transitions instantly or transitions gradually
when [WHITE BALANCE MODE] is switched.
Factory settings: OFF
SHOCKLESS WB SW SPEED [1 to 5]
When switching [WHITE BALANCE MODE], set the speed until it
transitions.
Factory settings: 4
145