Table of Contents
Advertisement
Working basis
Adjustment aid Figure
Adjusting plate
Information
The locking peg (3), the gage (8), and the dipstick (11) are included with
the machine as standard tools in the accessory pack.
The locking peg (3) can be used to lock the handwheel in place at
positions A to F ( p. 16).
3.4 Setting the handwheel into position
Fig. 1: Setting the handwheel into position
(1) - Marking
Some settings require that the handwheel be moved to a certain position.
To set the handwheel to the desired position:
1. Turn the handwheel until the desired letter (2) is parallel to the
Service Instructions 195 - 00.0 - 12/2017
10
11
Dipstick
(accessory
pack)
12
Gage
①
marking (1).
Order
Setting
number
0195 002980 • Set the stitch length limit of
the adjusting wheels
0965 000871 • Check oil level in hook drive
housing p. 127
0195 002988 • for the thread cutter (cutting test
outside of the machine)
(2) - Letter
②
15
Advertisement
Table of Contents
