Add Equipment - Banner XS26-2 Quick Start Manual

Defi ne the Project Settings
Click Project Settings.
Enter the information about the project:
Confi guration Name
Name of the confi guration; displayed
on the controller (models with display);
diff erent from fi le name.
Project
Project name is useful for distinguishing
between various application areas.
Author
Person designing the confi guration.
Notes
Supplemental information for this
confi guration or project.
Project Date
Date pertaining to the project.

Add Equipment

1. On the Equipment view select your
Base Module properties (Display,
Industrial Ethernet, Expandability) by
either double-clicking the module or
clicking the Edit under the properties
table when the module is selected.
2. Add Safety Input devices by clicking
under the Base Module:
• Emergency Stop
• Gate Switch
• Optical Sensor
Note: For the purpose of this
confi guration default device properties
are used.
6
www.bannerengineering.com - Tel: +1-763-544-3164 P/N 148770 Rev. F