IBM BladeCenter JS22 Problem Determination And Service Manual page 74

Table of Contents

Advertisement

Table 13. BA000010 to BA400002 Partition firmware SRCs (continued)
v Follow the suggested actions in the order in which they are listed in the Action column until the problem is
solved. If an action solves the problem, then you can stop performing the remaining actions.
v See Chapter 3, "Parts listing, Type 7998," on page 235 to determine which components are CRUs and which
components are FRUs.
Error code
BA01D054
BA01D055
BA01D056
BA01D0FF
60
JS22 Type 7998: Problem Determination and Service Guide
Description
DHCP::discover: DHCP nak received
DHCP::discover: DHCP decline
DHCP::discover: unknown DHCP
message
Closing the DHCP node failed.
Action
DHCP discovery did receive a DHCP offer
from a server that meets the client
requirements, but the server sent a DHCP not
acknowledged (DHCP nak) to the client DHCP
request.
Another client might be using the address that
was served.
This situation can occur when there are
multiple DHCP servers on the same network,
and server A does not know the subnet
configuration of server B, and vice-versa.
This situation can also occur when the pool of
addresses is not truly divided.
Set the DHCP server configuration file to
"authoritative".
Verify that the DHCP server is functioning
properly.
DHCP discovery did receive a DHCP offer
from one or more servers that meet the client
requirements. However, the client performed
an ARP test on the address and found that
another client was using the address.
The client sent a DHCP decline to the server,
but the client did not receive an additional
DHCP offer from a server. The client still does
not have a valid address.
Verify that the DHCP server is functioning
properly.
DHCP discovery received an unknown DHCP
message type. Verify that the DHCP server is
functioning properly.
1. Reboot the blade server.
2. If the problem persists:
a. Go to "Checkout procedure" on page
186.
b. Replace the system-board and chassis
assembly, as described in "Replacing the
Tier 2 system-board and chassis
assembly" on page 270.

Advertisement

Table of Contents
loading

This manual is also suitable for:

7998

Table of Contents