Table of Contents
Advertisement
The virtual service processor can start a variety of operating systems. Some codes
are specific to an operating system and therefore, do not apply to all operating
systems.
Table 16 lists the progress codes that might be displayed during the power-on
self-test (POST), along with suggested actions to take if the system hangs on the
progress code. Only when you experience a hang condition should you take any of
the actions described for a progress code.
In the following progress codes, x can be any number or letter.
Table 16. C2001000 to C20082FF checkpoints
v If the system hangs on a progress code, follow the suggested actions in the order in which they are listed in
the Action column until the problem is solved. If an action solves the problem, you can stop performing the
remaining actions.
v See Chapter 3, "Parts listing, Type 7998," on page 235 to determine which components are CRUs and which
components are FRUs.
Progress code
C2001000
C2001010
C2001100
C20011FF
C2001200
100
JS22 Type 7998: Problem Determination and Service Guide
Description
Partition auto-startup during a platform
startup
Startup source
Adding partition resources to the
secondary configuration
Partition resources added successfully
Checking if startup is allowed
Action
1. Go to "Recovering the system firmware" on
page 222.
2. Replace the system-board and chassis
assembly, as described in "Replacing the
Tier 2 system-board and chassis assembly"
on page 270.
1. Go to "Recovering the system firmware" on
page 222.
2. Replace the system-board and chassis
assembly, as described in "Replacing the
Tier 2 system-board and chassis assembly"
on page 270.
1. Go to "Recovering the system firmware" on
page 222.
2. Replace the system-board and chassis
assembly, as described in "Replacing the
Tier 2 system-board and chassis assembly"
on page 270.
1. Go to "Recovering the system firmware" on
page 222.
2. Replace the system-board and chassis
assembly, as described in "Replacing the
Tier 2 system-board and chassis assembly"
on page 270.
1. Go to "Recovering the system firmware" on
page 222.
2. Replace the system-board and chassis
assembly, as described in "Replacing the
Tier 2 system-board and chassis assembly"
on page 270.
Advertisement
Table of Contents
