IBM BladeCenter JS22 Problem Determination And Service Manual page 140

Table 18. CA000000 to CA2799FF checkpoints (continued)
v If the system hangs on a progress code, follow the suggested actions in the order in which they are listed in
the Action column until the problem is solved. If an action solves the problem, you can stop performing the
remaining actions.
v See Chapter 3, "Parts listing, Type 7998," on page 235 to determine which components are CRUs and which
components are FRUs.
Progress code
CA00E1FB
CA00E1FC
CA00E1FE
CA00E1FF
CA00E440
CA00E441
CA00E442
CA00E443
126
JS22 Type 7998: Problem Determination and Service Guide
Description
Scan SCSI bus for attached devices
Build boot device list for SSA adapters.
(The location code of the SSA adapter
being scanned is also displayed.)
Building device list for fibre-channel
(SAN) adapters. (The WWPN of the
SAN adapter being scanned is also
displayed.)
Build device list for fibre-channel (SAN)
adapters. (The LUN of the SAN adapter
being scanned is also displayed.)
Validate NVRAM, initialize partitions as
needed
Generate /options node NVRAM
configuration variable properties
Validate NVRAM partitions
Generate NVRAM configuration variable
dictionary words
Action
1. Go to "Checkout procedure" on page 186.
2. Replace the system-board and chassis
assembly, as described in "Replacing the
Tier 2 system-board and chassis assembly"
on page 270.
1. Go to "Checkout procedure" on page 186.
2. Replace the system-board and chassis
assembly, as described in "Replacing the
Tier 2 system-board and chassis assembly"
on page 270.
1. Go to "Checkout procedure" on page 186.
2. Replace the system-board and chassis
assembly, as described in "Replacing the
Tier 2 system-board and chassis assembly"
on page 270.
1. Go to "Checkout procedure" on page 186.
2. Replace the system-board and chassis
assembly, as described in "Replacing the
Tier 2 system-board and chassis assembly"
on page 270.
1. Go to "Checkout procedure" on page 186.
2. Replace the system-board and chassis
assembly, as described in "Replacing the
Tier 2 system-board and chassis assembly"
on page 270.
1. Go to "Checkout procedure" on page 186.
2. Replace the system-board and chassis
assembly, as described in "Replacing the
Tier 2 system-board and chassis assembly"
on page 270.
1. Go to "Checkout procedure" on page 186.
2. Replace the system-board and chassis
assembly, as described in "Replacing the
Tier 2 system-board and chassis assembly"
on page 270.
1. Go to "Checkout procedure" on page 186.
2. Replace the system-board and chassis
assembly, as described in "Replacing the
Tier 2 system-board and chassis assembly"
on page 270.