IBM BladeCenter JS22 Problem Determination And Service Manual page 61

Table 12. B700xxxx Licensed internal code SRCs (continued)
v Follow the suggested actions in the order in which they are listed in the Action column until the problem is
solved. If an action solves the problem, then you can stop performing the remaining actions.
v See Chapter 3, "Parts listing, Type 7998," on page 235 to determine which components are CRUs and which
components are FRUs.
B700 xxxx Error Codes
6994
6995
69C2
69C3
69D9
69DA
69DB
BAD1
F103
F104
F105
F106
F10A
F10B
F120
Description
Service processor failure.
Informational system log entry only.
Informational system log entry only.
Informational system log entry only.
Host Ethernet Adapter (HEA) failure.
Informational system log entry only.
System firmware failure.
The platform firmware detected an
error.
System firmware failure
Operating system error. System
firmware terminated a partition.
System firmware detected an internal
error
System firmware detected an error
System firmware detected an error
A processor resource has been disabled
due to hardware problems
Informational system log entry only.
Action
Replace the system-board and chassis
assembly, as described in "Replacing the Tier 2
system-board and chassis assembly" on page
270.
No corrective action is required.
No corrective action is required.
No corrective action is required.
Replace the system-board and chassis
assembly, as described in "Replacing the Tier 2
system-board and chassis assembly" on page
270.
No corrective action is required.
1. Collect the platform dump information.
2. Go to "Isolating firmware problems" on
page 222.
Go to "Isolating firmware problems" on page
222.
1. Collect the event log information.
2. Collect the platform dump information.
3. Go to "Isolating firmware problems" on
page 222.
Check the management-module event log for
partition firmware error codes (especially
BA00F104); then, take the appropriate actions
for those error codes.
1. Collect the event log information.
2. Collect the platform dump information.
3. Go to "Isolating firmware problems" on
page 222.
Replace the system-board and chassis
assembly, as described in "Replacing the Tier 2
system-board and chassis assembly" on page
270.
Look for and correct B1xxxxxx errors.
Replace the system-board and chassis
assembly, as described in "Replacing the Tier 2
system-board and chassis assembly" on page
270.
No corrective action is required.
Chapter 2. Diagnostics
47