202-221 Paper Jams - Lexmark XM3250 Service Manual

Sensor (input) static jam service check
Action
Step 1
Make sure that the paper is loaded properly. Use the
recommended paper. See
Does the problem remain?
Step 2
a
Enter the Diagnostics menu, and then navigate to:
Printer diagnostics and adjustments > Sensor tests
b
Find the sensor (Input).
Does the sensor status change while toggling the sensor?
Step 3
a
Reseat the sensor cable from the controller board.
b
Check the sensor and its actuator for improper installation and
damage.
Is the sensor properly installed and free of damage?
Step 4
Replace the sensor. See
page 278.
Does the problem remain?
202–221 paper jams
202 paper jam messages
Error code Description
202.03 Paper fed from the MPF never reached the sensor
(fuser exit).
202.05 Paper fed from the MPF never cleared the sensor
(fuser exit).
202.13 Paper fed from tray 1 never reached the sensor
(fuser exit).
202.15 Paper fed from tray 1 never cleared the sensor
(fuser exit).
202.23 Paper fed from tray 2 never reached the sensor
(fuser exit).
202.25 Paper fed from tray 2 never cleared the sensor
(fuser exit).
"Avoiding jams" on page
"Sensors (duplex and input) removal" on
Diagnostics and troubleshooting
Yes
Go to step 2.
71.
Contact the next
level of support.
Contact the next
level of support.
Contact the next
level of support.
Action
See "Sensor (fuser exit) jam at leading edge
service check" on page
See "Sensor (fuser exit) jam at trailing edge
service check" on page
See "Sensor (fuser exit) jam at leading edge
service check" on page
See "Sensor (fuser exit) jam at trailing edge
service check" on page
See "Sensor (fuser exit) jam at leading edge
service check" on page
See "Sensor (fuser exit) jam at trailing edge
service check" on page
84
7018
No
The problem is
solved.
Go to step 3.
Go to step 4.
The problem is
solved.
85.
86.
85.
86.
85.
86.