Lexmark XM3250 Service Manual page 82

Action
Step 9
a
Reseat the optional tray motor (pick/lift) cable.
b
Check if the motor is functional and free of damage.
Is the motor (pick/lift) functional and free of damage?
Step 10
Replace the optional tray.
Does the problem remain?
Optional tray to sensor (input) jam at trailing edge service check
Action
Step 1
Make sure that the paper is loaded properly. Use the
recommended paper. See
Does the problem remain?
Step 2
a
Enter the Diagnostics menu, and then navigate to:
Input tray quick print > MPF tray > Single
b
Check if the same error occurs.
Does the same problem remain?
Step 3
Check the optional tray separator roller assembly for wear and
damage.
Is the separator roller assembly free of wear and damage?
Step 4
Replace the separator roller assembly. See
assembly removal" on page
Does the problem remain?
Step 5
Check the transfer roller and its spring for improper installation and
damage.
Is the transfer roller properly installed and free of damage?
"Avoiding jams" on page
"Separator roller
321.
Diagnostics and troubleshooting
82
Yes
Contact the next
level of support.
Contact the next
level of support.
Yes
Go to step 2.
71.
Go to step 5.
Go to step 5.
Go to step 5.
Go to step 7.
7018
No
Go to step 10.
The problem is
solved.
No
The problem is
solved.
Go to step 3.
Go to step 4.
The problem is
solved.
Go to step 6.