Transfer Roller Removal; Jam Access Cover Removal - Lexmark XM3250 Service Manual

Transfer roller removal

For a video demonstration, see
1
Open the front door.
2
Release the two latches (A) on each end of the transfer roller.
3
Remove the roller.
Note: For a video demonstration, see

Jam access cover removal

1
Open the front door.
2
Remove the screw (A), and then release the cable from the jam access cover.
3
Push down, and then pull the two ends (B) of the springs to remove them.
4
Repeat step 3 for the other side.
5
Release the two latches (C).
6
Remove the clip (D).
Note: Some models do not have the clip (D) installed.
Transfer roller removal.
Transfer roller removal
Parts removal
264
at infoserve.lexmark.com/ids/sma.
7018