Lexmark XM3250 Service Manual page 76

Action
Step 9
Replace the MPF solenoid. See
page 235.
Does the problem remain?
Step 10
a
Enter the Diagnostics menu, and then navigate to:
Printer diagnostics and adjustments > Sensor tests
b
Find the sensor (Input).
Does the sensor status change while toggling the sensor?
Step 11
a
Reseat the sensor cable from the controller board.
b
Check the sensor and its actuator for improper installation and
damage.
Is the sensor properly installed and free of damage?
Step 12
Replace the sensor. See "Sensors (duplex and input) removal" on
page 278.
Does the problem remain?
Step 13
a
Check the jam access cover for obstructions along the paper
path.
b
Check if the jam access cover components are functional and
free of damage.
Are the jam access cover and its components functional and free
of damage?
Step 14
Replace the jam access cover. See
on page 264.
Does the problem remain?
"MPF solenoid removal" on
"Jam access cover removal"
Diagnostics and troubleshooting
76
Yes No
Go to step 10. The problem is
solved.
Go to step 13. Go to step 11.
Go to step 13. Go to step 12.
Go to step 13. The problem is
solved.
Contact the next The problem is
level of support. solved.
Contact the next The problem is
level of support. solved.
7018