3
Navigate to the folder where the zip files are extracted from the Service Restore Tool.
4
Select the file to import, and then click Import.
5
Repeat step 2 through step 4 for the other files that are included in the extracted zip file.
Updating the printer firmware
Warning—Potential Damage: Before updating the printer firmware, ask the next level of support for the
correct code. Using an incorrect code level may damage the printer.
Using a flash drive
Note: The printer must be in ready state to update the firmware.
This option is available only in printer models with front USB port.
1
Insert the flash drive into the USB port.
2
Depending on the printer model, do any of the following:
•
From the control panel, navigate to USB Menu: Print from USB > Accept or OK, and then select the file
that you need to flash.
•
Select the firmware file.
Note: Do not turn off the printer while the update is going on.
Using a network computer
Using the File Transfer Protocol (FTP)
Note: The printer must be in ready state to update the firmware.
1
Turn on the printer.
2
Obtain the IP address from the home screen.
Parts removal
207
7018