Rcm Commands - Compaq AlphaServer 1200 User Manual

6.3 RCM Commands

The RCM commands given in Table 6-1 are used to control and monitor a
system remotely.
Table 6-1 RCM Command Summary
Command Function
alert_clr Clears alert flag, stopping dial-out alert cycle
alert_dis Disables the dial-out alert function
alert_ena Enables the dial-out alert function
disable Disables remote access to the modem port
enable Enables remote access to the modem port
halt Halts the server. Emulates pressing the Halt button and
immediately releasing it.
haltin Causes a halt assertion. Emulates pressing the Halt button and
holding it in.
haltout Terminates a halt assertion created with haltin. Emulates releasing
the Halt button after holding it in.
hangup Terminates the modem connection
help or ? Displays the list of commands
poweroff Turns off power. Emulates pressing the On/Off button to the off
position.
poweron Turns on power. Emulates pressing the On/Off button to the on
position.
quit Exits console mode and returns to system console port
reset Resets the server. Emulates pressing the Reset button.
setesc Changes the escape sequence for invoking command mode
setpass Changes the modem access password
status Displays system status and sensors
Managing the System Remotely 6-7