Testing The System - Compaq AlphaServer 1200 User Manual

4.7 Testing the System

The test command runs firmware diagnostics for components of the system
drawer. This command is used to test Windows NT systems as well as DIGITAL
UNIX and OpenVMS systems.
Example 4-15 Test Command
P00>>> test
Console is in diagnostic mode
System test, runtime 1200 seconds
Type ^C if you wish to abort testing once it has started
Configuring adapters..
polling ncr0 (NCR 53C810) slot 1, bus 0 PCI, hose 1
dka500.5.0.1.1 Dka500
polling isp0 (QLogic ISP1020) slot 0, bus 2 PCI, hose 1
dkb0.0.0.2000.1 DKb0
polling floppy0 (FLOPPY) PCEB - XBUS hose 0
dva0.0.0.1000.0 DVA0
polling tulip0 (DECchip 21040-AA) slot 2, bus 0 PCI, hose 1
ewa0.0.0.2.1 08-00-2B-E6-4B-CC
polling tulip1 (DECchip 21140-AA) slot 4, bus 0 PCI, hose 0
ewb0.0.0.4.0 00-00-F8-02-23-74
Testing Ethernet device(s)
External loopback failed on ewb0 - check network connection
Testing VGA (alphanumeric mode only)
Starting phase 1 background cache/memory tests, affinity to all CPUs..
Starting phase 1 processor/cache thrasher on CPU0..
SCSI Bus ID 7
RRD46 0557
SCSI Bus ID 7
RZ29B 0007
RX23
BNC
AUI
Continued on next page
SRM Console 4-23