Compaq AlphaServer 1200 User Manual page 47

²
The show network command displays device information, including name and
type of connection to the system. See Section 4.3 for a description of the show
network command and the device naming convention.
³
The operating system is on a remote disk accessed through the Ethernet
controller in slot 4 of PCI1. The name of this device, ewa0, is used as an
argument to the boot command.
´
This command loads DIGITAL UNIX from ewa0, autobooting to multiuser
mode. See Section 4.5 for a description of the boot command.
The boot command accepts the name of a boot device, a boot file name
through the -file option, and boot flags through the -flags option. The
environment variables bootdef_dev, boot_file, and boot_osflags can also be
used to specify the default boot device or device list, the default boot file, and
flag information. When an option and the corresponding environment variable
are both in a command string, the option overrides the environment variable.
The value of the environment variable, however, is not changed. See Section
4.18 for information about environment variables.
µ
The operating system banner displays.
Operation 3-13