Compaq AlphaServer 1200 User Manual page 209

Table 6-2 RCM Status Command Fields
Item
Firmware Rev:
Escape Sequence:
Remote Access:
Alerts:
Alert Pending:
Temp (C):
RCM Power Control:
RCM Halt:
External Power:
Server Power:
Description
Revision of RCM firmware.
Current escape sequence to invoke RCM.
Modem remote access state. (ENABLE/DISABLE)
Alert dial-out state. (ENABLE/DISABLE)
Alert condition triggered. (YES/NO)
Current system temperature in degrees Celsius.
Current state of RCM system power control. (ON/OFF)
Asserted indicates that halt has been asserted with the
haltin command. Deasserted indicates that halt has
been deasserted with the haltout command or by
cycling power with the On/Off button on the control
panel. The RCM Halt: field does not report halts
caused by pressing the Halt button.
Current state of power to RCM. Always on.
Indicates whether power to the system is on or off.
Managing the System Remotely 6-15