Compaq AlphaServer 1200 User Manual page 211

Composing the Dial-Out String
Enter the set rcm_dialout command from the SRM console to compose the dial-out
string. Use the show command to verify the string. See Example 6–4.
Example 6–4 Typical RCM Dial-Out Command
P00>>> set rcm_dialout "ATXDT9,15085553333,,,,,,5085553332#;"
P00>>> show rcm_dialout
rcm_dialout
The dial-out string has the following requirements:
•
The string cannot exceed 47 characters.
•
Enclose the entire string following the set rcm_dialout command in quotation
marks.
•
Enter the characters ATDT after the opening quotation marks. Do not mix case.
•
Enter the character X after "AT" if the line to be used also carries voice mail.
•
The valid characters for the dial-out string are the characters on a phone keypad:
0–9, *, and #. A comma (,) requests that the modem pause for 2 seconds, and a
semicolon (;) is required to terminate the string.
The elements of the dial-out string are explained in Table 6-3.
ATXDT9,15085553333,,,,,,5085553332#;
Managing the System Remotely 6-17