Table of Contents
Advertisement
The Boot screen shown in Figure 5-1 is displayed at power-up and reset. Press F2 at
this screen to enter the setup program.
The AlphaBIOS Setup screen (Figure 5-2) is displayed. From this screen you can
select the tasks to perform. Use the arrow keys to select the menu item you want and
press Enter. (Refer to Section 5.2 for information on navigating the AlphaBIOS
screens.)
Figure 5-2 AlphaBIOS Setup Screen
Display System Configuration...
Upgrade AlphaBIOS
Hard Disk Setup...
CMOS Setup...
Install Windows NT
Utilities
About AlphaBIOS...
Press ENTER to partition or format hard disks.
ESC=Exit
AlphaBIOS Setup
PK-0726-96
AlphaBIOS Console
5-3
Advertisement
Table of Contents
Troubleshooting
