Pci And Eisa/Isa Slots - Compaq AlphaServer 1200 User Manual

7.5 Installing a PCI or EISA/ISA Card
Remove the top cover and left side panel to access the system board. After you
have installed the new module, verify the installation by issuing the show config
and show device commands from the SRM console or display the PCI
configuration from the AlphaBIOS console.
Configuration Rules
•
SCSI controllers (KZPxx-xx) must be installed in PCI0.
•
A graphics card can be installed in PCI0 slot 2.
Figure 7–9 PCI and EISA/ISA Slots
PCI0 Slot 2
PCI0 Slot 3
PCI0 Slot 4
PCI1 Slot 2
PCI1 Slot 3
Either PCI1 Slot 4
Or EISA/ISA Slot
PK-0903E-97
Installing Components 7-13