Compaq AlphaServer 1200 User Manual page 120

Example 4-21 Lfu Command (Continued)
WARNING: updates may take several minutes to complete for each device.
Confirm update on: AlphaBIOS
AlphaBIOS Updating to V6.40-1... Verifying V6.40-1... PASSED.
Confirm update on: srmflash
srmflash Updating to V6.0-3... Verifying V6.0-3... PASSED.
UPD> exit
The lfu command starts the Loadable Firmware Update (LFU) Utility. The syntax is:
lfu
NOTE: If the system has been shut down from a booted program (most commonly,
the operating system) or in some other way halted back to the SRM console,
the system must be reset before running LFU.
See Chapter 3 for more information about LFU.
4-34 User's Guide
[Y/(N)] y
DO NOT ABORT!
[Y/(N)] y
DO NOT ABORT!