Preparing To Install Or Remove Components - Compaq AlphaServer 1200 User Manual

7.1 Preparing to Install or Remove Components

To prepare your system for installation and removal of components, you will
need to assemble the required equipment, familiarize yourself with antistatic
precautions, and remove the top and side panels of the system unit.
Required Equipment
You need the following equipment to perform the installation and removal
procedures described in the following sections:
•
Flat-head screwdriver
•
Phillips screwdriver
•
Antistatic wrist strap
•
Replacement option board kit or device kit, if necessary
7-2 User's Guide