Configuring The System; Configuring Dssi; Set Host Command - Compaq AlphaServer 1200 User Manual

4.6 Configuring the System

4.6.1 Configuring DSSI

The set host command is used for system configuration when a DSSI device is in
the system.
Example 4-13 Set Host Command
P00>>> show device kfpsa0
dud0.0.0.3.0
P00>>> set mode diag
P00>>> config kfpsa*
P00>>> set host -dup dud0
starting DIRECT on pud0.0.0.3.0 (R2YQYA)
Copyright (C) 1997
PRFMON V1.0
DKCOPY V1.0
DRVEXR V2.0
DRVTST V2.0
HISTRY V1.0
DIRECT V1.0
ERASE V2.0
VERIFY V1.0
DKUTIL V1.0
PARAMS V2.0
Total of 10 programs.
Task?
P00>>> set host -dup -task params dud0
starting PARAMS on pud0.0.0.3.0 (R2YQYA)
Copyright (C) 1995
PARAMS> show allclass
Parameter Current
--------- ------------- ------------ ------- ------
ALLCLASS
PARAMS> exit
Exiting...
P00>>>
4-20 User's Guide
R2YQYA$DIA0
Digital Equipment Corporation
D 2-NOV-1995 10:30:58
D 2-NOV-1995 10:30:58
D 2-NOV-1995 10:30:58
D 2-NOV-1995 10:30:58
D 2-NOV-1995 10:30:58
D 2-NOV-1995 10:30:58
D 2-NOV-1995 10:30:58
D 2-NOV-1995 10:30:58
D 2-NOV-1995 10:30:58
D 2-NOV-1995 10:30:58
Digital Equipment Corporation
Default
0
RF72
Type Radix
0 Byte Dec B