Compaq AlphaServer 1200 User Manual page 96

Example 4-3 Show Device Command
P00>>> show dev
polling ncr0 (NCR 53C810) slot 1, bus 0 PCI, hose 1
dka500.5.0.1.1 Dka500
polling isp0 (QLogic ISP1020) slot 0, bus 2 PCI, hose 1
dkb0.0.0.2000.1 DKb0
polling floppy0 (FLOPPY) PCEB - XBUS hose 0
dva0.0.0.1000.0 DVA0
polling tulip0 (DECchip 21040-AA) slot 2, bus 0 PCI, hose 1
ewa0.0.0.2.1 08-00-2B-E6-4B-CC
polling tulip1 (DECchip 21140-AA) slot 4, bus 0 PCI, hose 0
ewb0.0.0.4.0 00-00-F8-02-23-74
P00>>>
The show device command displays status for devices and controllers in the system:
SCSI and MSCP devices, the internal floppy drive, and the network. The syntax is:
show device [controller_name]
controller_name The controller name or abbreviation. When abbreviations or
wildcards are used, all controllers that match the type are
displayed. If no name is given, the display is a list of all devices
and controllers in the system.
An example of a device name is dka500.5.0.1.1. Table 4-4 shows the interpretation
of this device name.
4-10 User's Guide
SCSI Bus ID 7
RRD46 0557
SCSI Bus ID 7
RZ29B 0007
RX23
BNC
AUI