Compaq AlphaServer 1200 User Manual page 194

5.10.2 Running Utilities from a Serial Terminal
Utilities are run from a serial terminal in the same way as from a graphics monitor.
The menus are the same, but some keys are different.
Table 5-1 AlphaBIOS Option Key Mapping
AlphaBIOS Key
F1
F2
F3
F4
F5
F6
F7
F8
F9
F10
Insert
Delete
Backspace
Escape
1. Start AlphaBIOS Setup by issuing the command alphabios.
2. Press F2 in the AlphaBIOS Boot screen.
3. From AlphaBIOS Setup, select Utilities, and select Run Maintenance
Program from the submenu that is displayed. Press Enter.
4. In the Run Maintenance Program dialog box, type the name of the program to
be run in the Program Name field. Then tab to the Location list box, and select
the hard disk partition, floppy disk, or CD-ROM drive from which to run the
program.
Press Enter to execute the program.
5-48 User's Guide
VTxxx Key
Ctrl/A
Ctrl/B
Ctrl/C
Ctrl/D
Ctrl/E
Ctrl/F
Ctrl/P
Ctrl/R
Ctrl/T
Ctrl/U
Ctrl/V
Ctrl/W
Ctrl/H
Ctrl/[