Compaq AlphaServer 1200 User Manual page 129

4.15 Initializing the System
The initialize command resets the system and executes the power-up tests.
Example 4-28 Initialize Command
P00>>> initialize
Initializing. . .
SROM V3.0 on cpu0
SROM V3.0 on cpu1
XSROM V5.0 on cpu1
XSROM V5.0 on cpu0
BCache testing complete on cpu1
BCache testing complete on cpu0
mem_pair0 - 64 MB
20..20..21..21..23..
please wait 9 seconds for T24 to complete
24..24..
Memory testing complete on cpu1
Memory testing complete on cpu0
starting console on CPU 0
sizing memory
0 64 MB DIMM
starting console on CPU 1
probing IOD1 hose 1
bus 0 slot 1 - NCR 53C810
probing IOD0 hose 0
bus 0 slot 1 - PCEB
probing EISA Bridge, bus 1
bus 0 slot 2 - S3 Trio64/Trio32
bus 0 slot 3 - DECchip 21040-AA
bus 0 slot 5 - NCR 53C810
configuring I/O adapters...
ncr0, hose 1, bus 0, slot 1
floppy0, hose 0, bus 1, slot 0
tulip0, hose 0, bus 0, slot 3
ncr1, hose 0, bus 0, slot 5
System temperature is 23 degrees C
AlphaServer 1200 Console V5.0-2, 19-NOV-1997 13:57:07
P00>>>
SRM Console 4-43