Lfu Commands - Compaq AlphaServer 1200 User Manual

3.9.5

LFU Commands

The commands summarized in Table 3–2 are used to update system firmware.
Table 3–2 LFU Command Summary
Command Function
display Shows the physical configuration of the system.
exit Terminates the LFU program.
help Displays the LFU command list.
lfu Restarts the LFU program.
list Displays the inventory of update firmware on the selected device.
readme Lists release notes for the LFU program.
update Writes new firmware to the module.
verify Reads the firmware from the module into memory and compares it
with the update firmware.
These commands are described in the following pages.
3-44 User's Guide