Digital Unix Or Openvms Alpha (Srm) Console Commands; Basic Commands; Table 4-1: Basic Srm Console Commands - Compaq AlphaServer 1000A Owner's Manual

Basic Operation

Digital UNIX or OpenVMS Alpha (SRM) Console Commands

There are two levels of Digital UNIX and OpenVMS Alpha (SRM) console commands:
•
Basic
•
Comprehensive

Basic Commands

Use basic commands to perform common tasks described in this guide. Table 4-1 lists
each console task with their corresponding command and syntax.
Table 4–1: Basic SRM Console Commands
Task
Boot the Windows NT (ARC)
console firmware.
Boot the operating system.
Display error logs.
Resume program execution.
Invoke the EISA
Configuration Utility.
Display online help on using
console commands.
Initialize the system.
Halt system tests invoked by test
command.
Display online help on using
console commands.
Display status of all
system processes.
Set an environment variable.
Display the value of an
environment variable or
display configuration
information.
Test the system and display
results.
4-12 AlphaServer 1000A Rackmount Owner's Guide
Command Syntax
arc arc
boot boot [-flags [longword,]longword
[-halt] [-filename][boot_device]
cat el cat el or more el
continue continue
ecu ecu
help help [command . . . ]
init init
kill_diags kill_diags
man man [command . . . ]
ps ps
set set [-default] envar val
show show [envar][{config, device, memory,
pal, version}]
test test