Compaq AlphaServer 1200 User Manual page 193

5.10.1 Running Utilities from a Graphics Monitor
1. Start AlphaBIOS Setup. If the system is in the SRM console, set the SRM
console environment variable to graphics and issue the command alphabios.
2. From AlphaBIOS Setup, select Utilities, then select Run Maintenance
Program from the submenu that is displayed, and press Enter. See Figure 5-29.
3. In the Run Maintenance Program dialog box (Figure 5-28), type the name of
the program to be run in the Program Name field. Then Tab to the Location list
box, and select the hard disk partition, floppy disk, or CD-ROM drive from
which to run the program.
4. Press Enter to execute the program.
Figure 5-29 AlphaBIOS Utilities Menu
Display System Configuration...
Upgrade AlphaBIOS
Hard Disk Setup...
CMOS Setup...
Install Windows NT
Utilities
About AlphaBIOS...
AlphaBIOS Setup
Run ECU from floppy...
OS Selection Setup...
Run Maintenance Program...
AlphaBIOS Console
F1=Help
PK-0729-96
5-47