Rear Panel - Boss JamStation JS-5 Owner's Manual

Part Names and Functions
24.STOP Button
This stops performance.
25.START Button
This starts performance.
26.REC (Record) Button
This puts the JS-5 in a state where recording is possible.

Rear Panel

fig.IN02-02
28
28.Cord Hook
This is for fastening the cord from the supplied AC
adapter. This can help prevent power loss due to the
plug being pulled out, or excessive force being applied to
the AC adapter jack if the cord is accidentally yanked.
29.AC Adapter Jack
This is for connecting the included AC adapter (BRC
series).
30.POWER Switch
This switches the power on and off.
31.MIDI IN and OUT Connectors
These are for connecting external MIDI instruments. Use
MIDI cables (sold separately) to make the connections.
32.FOOT SW (Foot Switch) Jack
This is for connecting a foot switch such as the FS-5U
(sold separately). By using the PCS-31 connection cord
sold separately, you can connect and use two foot
switches.
14
31
30
29
Side Panel
27.MEMORY CARD Slot
This is for inserting a memory card (smart media).
Purchase smartmedia at your local computer dealer or digital
camera vendor.
The JS-5 can use 8 to 64 MB SmartMedia with a power-
source voltage of 3.3 V.
Inserting SmartMedia other than those described here
may result in corruption of data in the JS-5. Be sure
never to use anything other than the specified media.
* Roland S2M-5/S4M-5 SmartMedia cannot be used.
34
33
32
33.PHONES (Headphones) Jack
This is for connecting headphones.
34.OUTPUT Jacks R and L (MONO)
These are output jacks for audio signals. They are used
to connect an amplifier, audio set, or the like.
Use an audio cable (sold separately) to make the
connection.
35.REC INPUT Selector Switch
This makes the input sound of a device connected to the
REC INPUT jack compatible with the JS-5.
36.REC INPUT Jack
This is for connecting an instrument you play yourself,
such as an electric guitar or microphone.
36
35
37