Boss JamStation JS-5 Owner's Manual page 108

Chapter 7 Changing Effect Settings
LEVEL (Output Level) 0–127
Specify the output volume.
CHO FL (Chorus
This effect connects a chorus and flanger in series.
fig.RE07-137
Balance D
L in
Balance E
Chorus
Balance E
R in
Balance D
CHO PREDLY (Chorus Pre delay) 0.0–100 ms
Specify the time delay from the original sound until the
chorus sound is heard.
CHO RATE (Chorus Rate) 0.05–10.0 Hz
Specify the modulation frequency of the chorus sound.
CHO DEPTH (Chorus Depth) 0–127
Specify the modulation depth of the chorus sound.
CHO BAL (Chorus Balance) D100:0E–D0:100E
Specify the volume balance between the original sound and
the chorus sound.
With a setting of D100:0E only the original sound will be
output, and with a setting of D0:100E only the chorus sound
will be output.
FL PRE DLY (Flanger Pre delay) 0.0–100 ms
Specify the time delay from the original sound until the
flanger sound is heard.
FL RATE (Flanger Rate) 0.05–10.0 Hz
Specify the modulation frequency of the flanger sound.
FL DEPTH (Flanger Depth) 0–127
Specify the modulation depth of the flanger sound.
FL FEEDBACK (Flanger Feedback) -98–+98%
Specify the proportion (%) of the flanger sound that is to be
returned to the input. Positive (+) settings will return the
sound to the input with the original phase, while negative (-)
settings produce an inverted phase.
FL BAL (Flanger Balance) D100:0E–D0:100E
Specify the volume balance between the chorus sound that
passes through the flanger and the chorus sound that does
not pass through the flanger.
With a setting of D100:0E only the chorus sound will be
output, and with a setting of D0:100E only the chorus that
passes through the flanger sound will be output.
LEVEL (Output Level) 0–127
Specify the output volume.
108
Flanger)
Balance D
L out
Feedback
Balance E
Flanger
Balance E
R out
Balance D
CHO/DLY (Chorus Delay)
This effect connects a chorus and a delay in parallel.
fig.RE07-138
L in
Delay
Feedback
Chorus
R in
* The parameters that you can set are the same as for "CHO
DLY." However, the Delay Balance setting determines the
balance level for the original sound and the delayed sound.
FL/DLY (Flanger Delay)
This effect connects a flanger and a delay in parallel.
fig.RE07-139
L in
Delay
Feedback
Feedback
Flanger
R in
* The parameters that you can set are the same as for "FL
DLY." However, the Delay Balance setting determines the
balance level for the original sound and the delayed sound.
CHO/FL (Chorus Flanger)
This effect connects a chorus and a flanger in parallel.
fig.RE07-140
L in
Flanger
Feedback
Chorus
R in
* The parameters that you can set are the same as for "CHO
FL." However, the Flanger Balance setting determines the
balance level for the original sound and the flanger sound.
Balance D
L out
Balance E
Balance E
R out
Balance D
Balance D
L out
Balance E
Balance E
R out
Balance D
Balance D
L out
Balance E
Balance E
R out
Balance D