Boss JamStation JS-5 Owner's Manual page 92

Chapter 7 Changing Effect Settings
BAND 4 (Band 4 Level) -15–+15 dB
Specify the gain (amount of boost or cut) at 1250 Hz.
BAND 5 (Band 5 Level) -15–+15 dB
Specify the gain (amount of boost or cut) at 2000 Hz.
BAND 6 (Band 6 Level) -15–+15 dB
Specify the gain (amount of boost or cut) at 3150 Hz.
BAND 7 (Band 7 Level) -15–+15 dB
Specify the gain (amount of boost or cut) at 4000 Hz.
BAND 8 (Band 8 Level) -15–+15 dB
Specify the gain (amount of boost or cut) at 8000 Hz.
WIDTH (Bandwidth) 0.5–8.0
This setting, which is common for each Band, sets the width
of the frequency band which is raised and lowered by the
Level value.
LEVEL (Output Level) 0–127
Specify the output volume.
ENHANCER
Enhancer controls the overtone structure of the high
frequency range, adding sparkle to the sound and improving
the definition.
fig.RE07-106
L in
Enhancer
R in
Enhancer
SENS (Sensitivity) 0–127
Specify the depth of the Enhancer effect.
MIX (Mix Level) 0–127
Specify the proportion by which the overtones generated by
the enhancer will be mixed with the original sound.
LOW GAIN -15–+15 dB
Specify the low frequency gain (amount of boost or cut).
Positive (+) settings will emphasize (boost) the low
frequency range.
HI GAIN (High Gain) -15–+15 dB
Specify the high frequency gain (amount of boost or cut).
Positive (+) settings will emphasize (boost) the high
frequency range.
LEVEL (Output Level) 0–127
Specify the output volume.
92
2-Band
L out
EQ
Mix
2-Band
R out
EQ
Mix
AUTO-WAH
Auto Wah cyclically moves the frequency of a filter to
produce a wah effect (cyclic modulation of the tone).
fig.RE07-107
L in
Auto Wah
R in
FILTER TYPE LPF/BPF
Specify the type of filter.
LPF (Low-pass Filter):
The wah effect will be produced over a wide frequency
range.
BPF (Bandpass Filter):
The wah effect will be produced over a narrow frequency
range.
SENS (Sensitivity) 0–127
Specify the sensitivity with which the filter will be affected.
MANUAL 0–127
Specify the center frequency at which the wah effect will be
produced.
PEAK 0–127
Specify how the wah effect will affect the region around the
center frequency.
Lower settings will produce a wah effect in a broad area
around the center frequency. Higher settings will produce a
wah effect in a narrow area around the center frequency.
LFO RATE 0.05–10.0 Hz
Specify the modulation frequency of the wah effect.
LFO DEPTH 0–127
Specify the modulation depth of the wah effect.
LEVEL (Output Level) 0–127
Specify the output volume.
ROTARY
This simulates an old-fashioned rotary speaker, which adds
undulations to the sound by rotating the speaker as it plays.
This has the greatest effect when used with an organ sound.
The horn (the treble-range speaker) and the rotor (the bass-
range speaker) can be combined to re-create these subtle
effects.
fig.RE07-108
L in
Rotary
R in
L out
R out
L out
R out