Adding Fill-Ins And Breaks; Erasing Forms; Copying Forms - Boss JamStation JS-5 Owner's Manual

For measures earlier than this measure, a "
displayed in the upper right of the screen.
8. Once you have finished recording, press [STOP].
[REC] goes dark, and the Song screen reappears.

Adding Fill-ins and Breaks

Use the following procedure to add fill-ins and breaks after
recording.
1. Display the Form's Recording Standby screen (p. 66).
[REC] and [SONG] lights up.
2. Press [REC] to display "REAL."
Realtime Recording is selected.
fig.RE04-05
3. Press [START].
The Form's Realtime Recording screen is displayed, and
recorded Form is played.
4. Press [FILL 1] or [FILL 2], or [BREAK 1] or [BREAK 2]
in time with the recording.
5. Once you have finished recording, press [STOP].
[REC] goes dark, and the Song screen reappears.

Erasing Forms

" will be
You can erase the recorded Form in the current screen.
After the Form is erased, "------" is displayed for the Form,
and the previous Form is carried forward (p. 68).
1. Display the Form's Step Recording screen (p. 66).
fig.RE04-12
2. Press [FWD] or [RWD] to show the Form you want to
erase.
3. Press [ERASE] ([SHIFT] + [UTILITY]).

Copying Forms

This copies the Forms in a specified range of measures and
copies them to other measures on the same track.
fig.RE04-13
1. At the Form's Step Recording screen, press [COPY]
([SHIFT] + [EFFECTS]).
The screen for selecting the track to copy appears.
fig.RE04-46
2. Turn [VALUE] to select "FORM."
3. Press [ENTER].
The copy-destination designation screen appears.
fig.RE04-14
4. Specify the range of measures in the copy source.
Use [CURSOR] and [VALUE] to specify the starting
measure and final measure.
Chapter 4 Creating User Songs
001 002 003
INTRO VERSE 1 FILL 1
Copy
008 009 010
VERSE 1 FILL 1
Relevant Track
Starting measure Final measure
004
VERSE 2
011
VERSE 2
69