Rear Panel; Side Panel - Boss DUAL DIGITAL DELAY SDE-3000D Reference Manual

Table of Contents

Advertisement

Rear Panel

Area
Explanation
INPUT L/MONO jack
Connect your guitar or keyboard here.
A
For a mono connection, use only the L/MONO jack.
If the unit is set for stereo input, use this to input the L channel
audio.
INPUT R jack
When you connect a device to this jack, the L/R jack pair
B
automatically switches to stereo input. In this case, this jack is used
to input the R (right) channel.
OUTPUT L/MONO jack
C
Connect this to your guitar amp, mixer or other audio equipment.
For a mono output, connect only to the L/MONO jack.
OUTPUT R jack
D
Connect this to your guitar amp, mixer or other audio equipment.
CTL 2, 3/EXP 1 jack
You can connect an expression pedal
E
jacks for controlling a variety of parameters.
* Use only the specified expression pedal. By connecting any other expression
pedals, you risk causing malfunction and/or damage to the unit.
* For more about footswitch settings, refer to "Connecting Footswitches" (p. 24).

Side Panel

MIDI (OUT/IN) jacks
Use TRS/TRS or TRS/MIDI connecting cables to connect this unit to an
external MIDI device.
Ø
"Connecting with an External MIDI Device" (p. 31)
Sold separately:
TRS/TRS connecting cable
BCC-1-3535, BCC-2-3535
TRS/MIDI connecting cable
BMIDI-5-35, BMIDI-1-35, BMIDI-2-35
A
B
H
or footswitches
to these
(*1)
(*2)
C
D
E
Area
Explanation
CTL4, 5/EXP2/GA-FC jack
F
You can connect an expression pedal
controllers
to these jacks for controlling a variety of parameters.
(*3)
DC IN jack
Connect the AC adaptor here.
G
The SDE-3000D powers up when the AC adaptor is connected to the
DC IN jack.
Ground terminal
H
Connect this to an external earth or ground if necessary.
*1 Expression pedal
Sold separately: EV-30, FV-500L, FV-500H, Roland EV-5
*2 Footswitch
Sold separately: FS-5U, FS-5L, FS-6, FS-7
*3 Foot controller
Sold separately: GA-FC, GA-FC EX
USB port (USB Type-C
)
®
Connect your computer using a commercially available USB cable that
supports USB 2.0.
Ø
"Connecting to a Computer" (p. 34)
Panel Descriptions
F
G
or footswitches
(*1)
* Do not use a USB cable that is designed only
for charging a device. Charge-only cables
cannot transmit data.
and foot
(*2)
5

Advertisement

Table of Contents
loading

Table of Contents