Boss JamStation JS-5 Owner's Manual page 42

Let's Create a Song
17
Press [REC] to display "STEP."
Step recording is now selected.
18
Press [CURSOR] to make the Quantize display flash, then
turn [VALUE] to make the setting for quantizing.
In this example, set this to " " (whole note).
19
Press [START].
The Step Recording screen for chords appears, and recording begins.
fig.QS03-16
20
Record the chord (Non-Chord Type "E") for the first
measure.
Press [E].
Next, press [CURSOR
[VALUE] to select "- -" (Non-Chord Type).
fig.QS03-17
21
Press [FWD] several times.
The operation proceeds with the timing (steps) for recording the next chord
(E7th). In this example, it advances to measure 5.
22
Record the next chord.
Press [E] [7th].
42
Beat
Clock
Quantize
], making the Chord Type display flash, then turn
Quantizing when using
step recording sets the
resolution of the steps that
proceed when you press
[FWD] or [RWD] in later
operations.
The resolution with which
a measure is divided is set
by notes, and increasing
the resolution of the notes
increases the number of
steps (the recording timing
for the Form).
A clock is an even smaller
division of a beat. One beat
is equal to 96 clocks.