Erasing Chords; Copying Chords - Boss JamStation JS-5 Owner's Manual

Erasing Chords

You can erase the recorded Chord in the current screen.
After the Chord is erased, the previous Chord is carried
forward.
1. Display the Chord's Step Recording screen (p. 66).
fig.RE04-24
2. Use [FWD] or [RWD] to show the Chord you want to
erase.
3. Press [ERASE] ([SHIFT] + [UTILITY]).

Copying Chords

This copies the Chords in a specified range of measures and
copies them to other measures on the same track.
fig.RE04-25
001 002
B E
7th 7th
008 009
E
7th
1. At the Chord's Step Recording screen, press [COPY]
([SHIFT] + [EFFECTS]).
The screen for selecting the track to copy appears.
fig.RE04-47
2. Turn [VALUE] to select "CHORD."
3. Press [ENTER].
The copy-source designation screen appears.
fig.RE04-26
Starting measure Final measure
003 004
B E
7th 7th
Copy
010 011
B E
7th 7th
Relevant Track
Chapter 4 Creating User Songs
4. Specify the range of measures in the copy source.
Use [CURSOR] and [VALUE] to specify the starting
measure and final measure.
5. Press [ENTER].
The copy-destination designation screen appears.
fig.RE04-27
Starting measure
6. Specify the measure for the copy destination.
Turn [VALUE] to specify the starting measure. The final
measure is determined automatically by the number of
measures in the copy source.
7. Press [ENTER].
The copy confirmation screen appears.
fig.RE04-16
* To cancel, press [EXIT]. The copy-destination screen
reappears.
8. Press [ENTER] when you want to execute the copy.
The copy will be executed, and when it is finished the
display will indicate "Completed!"
73