Boss JamStation JS-5 Owner's Manual page 149

Song select
Status 2nd byte
F3H ssH
ss=Song number : 00H-63H (0-99)
* If a Preset Song is selected on the JS-5, this message switches Preset Songs. If a User Song
is selected, it switches User Songs. This message cannot switch between Preset and User
Songs.
System Realtime Message
Timing Clock
Status
F8H
* This message is ignored when the MIDI Sync mode is set at INT or REMOTE.
Start
Status
FAH
* This message is ignored when the MIDI Sync mode is set at INT.
Continue
Status
FBH
* This message is ignored when the MIDI Sync mode is set at INT.
Stop
Status
FCH
* This message is ignored when the MIDI Sync mode is set at INT.
Active Sensing
Status
FEH
* Whenever the JS-5 receives this message, it monitors the interval of the incoming data. If
the subsequent message has not arrived within about 420 ms after the previous data, it
processes all tracks as though it has received All Sound Off, All Notes Off, Reset All
Controllers, and mutes the sounding voices, then stops monitoring receiving interval.
3. Messages stored during Realtime
recording of styles
Channel Voice Message
Note Off
Status 2nd byte
9nH kkH
n=MIDI channel : 1H-3H, 9H (ch. 2, 3, 4, 10)
kk=Note number : 00H-7FH (0-127)
Note on
Status 2nd byte
9nH kkH
n=MIDI channel : 1H-3H, 9H (ch. 2, 3, 4, 10)
kk=Note number : 00H-7FH (0-127)
vv=Velocity : 01H-7FH (1-127)
3rd byte
00H
3rd byte
vvH
MIDI Implemantation
4. Exclusive Communications
General
JS-5 can do one-way communications to send and receive parameters for kits, system setup,
sequence, user chord.
Model ID included in the exclusive message should be 00H 35H. The device ID code should
be System Exclusive Device ID of MIDI parameter. Note that the actual value that set in
device ID field is smaller by one than the value set System Exclusive Device ID of MIDI
parameter.
Universal Non-Realtime System Exclusive Message
Inquiry Request
Status data byte
F0H 7EH, dev, 06H, 01H
Byte Description
F0H Exclusive Status
7EH ID Number (Universal Non-Realtime Message)
dev Device ID (dev: 10H(17)-1FH(32))
06H Sub ID#1 (General Information)
01H Sub ID#2 (Inquiry Request)
F7H EOX (End of Exclusive)
* The dev is own device number or 7FH (Broadcast).
* When Inquiry Request is received, Inquiry Reply message will be transmitted.
Inquiry Reply
Status Data byte
F0H 7EH, dev, 06H, 02H,
41H, 01H, 13H, 00H, 00H,
00H, 03H, 00H, 00H
Byte Description
F0H Exclusive Status
7EH ID Number (Universal Non-Realtime Message)
dev Device ID (dev: 10H(17)-1FH(32))
06H Sub ID#1 (General Information)
02H Sub ID#2 (Inquiry Reply)
41H Manufacturer ID (Roland)
01H, 13H Device Family Code
00H, 00H Device Family Number Code
00H, 03H, 00H, 00H Software Revision Level
F7H EOX (End of Exclusive)
* Reply the message by the unique device ID (dev) when the device has received the
Inquiry Request Message in the Broadcast.
Data Transmission
Request data RQ1 11H
Byte Description
F0H Exclusive status
41H manufacturer ID (Roland)
DEV device ID (00H-0FH)
00H model ID (JS-5) MSB
35H model ID (JS-5) LSB
11H command ID (RQ1)
aaH address MSB
aaH address
aaH address
aaH address LSB
ssH size MSB
ssH size
ssH size
ssH size LSB
sum checksum
F7H EOX (End of Exclusive)
Status
F7H
Status
F7H
149