Boss JamStation JS-5 Owner's Manual page 99

DEPTH (Modulation Depth) 0–127
Specify the modulation depth of the modulation effect.
PHASE 0–180
Specify the spaciousness of the modulation sound.
HF DAMP (High-Frequency Damp)
200–8000 Hz, BYPASS
Specify the frequency at which the high frequency range of
the delay sound returned to the input will be cut.
If you do not want the sound to be cut, select BYPASS.
LOW GAIN -15–+15 dB
Specify the gain (amount of boost or cut) of the low
frequency range.
Positive (+) settings will emphasize (boost) the low
frequency range.
HI GAIN (High Gain) -15–+15 dB
Specify the gain (amount of boost or cut) of the high
frequency range.
Positive (+) settings will emphasize (boost) the high
frequency range.
BALANCE (Effect Balance) D100:0E–D0:100E
Specify the volume balance between the original sound and
the modulation-delay sound.
With a setting of D100:0E only the original sound will be
output, and with a setting of D0:100E only the modulation-
delay sound will be output.
LEVEL (Output Level) 0–127
Specify the output volume.
Chapter 7 Changing Effect Settings
3-TAP-DLY (Triple Tap Delay)
Triple-tap-delay is an effect that produces delays in three
directions: center, left and right. The delay time can also be
specified as a note length relative to a specific tempo.
fig.RE07-119
L in
Left Tap
Triple Tap Delay
Feedback
Right Tap
R in
DELAY C (Delay Time Center)
200–1000 ms/ / /
Specify the delay time from the original sound until the
center delay sound is heard.
* When set with a note, the Step Rate is synchronized to the
MIDI clock of the JS-5 or an external device. Use Clock
Source (p. 133), a system parameter, to select whether the
MIDI clock of the JS-5 or the external device is to be used for
synchronization.
* When a note value has been selected as the setting, and the
tempo is slowed so much that the resulting delay time exceeds
the permissible range, the actual delay time will be 1/2, 1/4,
1/8... of the selected note values, in keeping with the tempo in
use at that time.
* When a numerical setting is made, the MIDI clock is ignored.
If the setting is made with a note but no external MIDI clock is
received, the changes in pitch are synchronized with the JS-5's
built-in default tempo (p. 133).
DELAY L (Delay Time Left)
200–1000 ms/ / /
Specify the delay time from the original sound until the left
delay sound is heard.
DELAY R (Delay Time Right)
200–1000 ms/ / /
Specify the delay time from the original sound until the right
delay sound is heard.
FEEDBACK -98–+98%
Specify the proportion (%) of the delay sound that is to be
returned to the input.
Positive (+) settings will return the sound to the input with
the original phase, while negative (-) settings produce an
inverted phase.
LEVEL C (Center Level) 0–127
Specify the volume of the center delay sound.
Balance D
2-Band
L out
EQ
Balance E
Center Tap
Balance E
2-Band
R out
EQ
Balance D
/ / / / / / /
/ / / / / / /
/ / / / / / /
99