Copying Chord Progression - Boss JamStation JS-5 Owner's Manual

Chapter 5 Editing Songs
* When attempting to copy many measures at one time, the
message "No More Memory!" may be displayed, and you may
not be able to copy the data. In this case, you can copy the data
by dividing the measures to be copied into smaller sections,
and repeating the copy procedure as many times as is needed.
7. Press [ENTER].
The copy-destination designation screen appears.
fig.RE04-15
Beginning measure
8. Specify the measure for the copy destination.
Turn [VALUE] to specify the starting measure. The final
measure is determined automatically by the number of
measures in the copy source.
9. Press [ENTER].
The copy confirmation screen appears.
fig.RE04-16
* To cancel, press [EXIT]. The copy-destination designation
screen reappears.
10. Press [ENTER] when you want to execute the copy.
The copy will be executed, and when it is finished the
display will indicate "Completed!"

Copying Chord Progression

This copies the Chords in a specified range of measures and
copies them to other measures on the same track.
fig.RE04-25
001 002
B E
7th 7th
008 009
E
7th
* By copying measures in which no Chord has been recorded
(measures in which a Chord recorded in even earlier measures
are passed on), you can make blank measures in the copy
destination.
1. Select the User Song whose chord progression you
wish to copy.
78
003 004
B E
7th 7th
Copy
010 011
B E
7th 7th
2. While play is stopped, press [COPY] ([SHIFT] +
[EFFECTS]).
The Song copy screen appears.
fig.RE05-25
3. Press [CURSOR
] to select "COPY MEASURE?"
The screen for selecting the track to copy appears.
fig.RE05-46
4. Turn [VALUE] to select "CHORD."
5. Press [ENTER].
The copy-source designation screen appears.
fig.RE04-26
Starting measure Final measure
6. Use [CURSOR] and [VALUE] to specify the starting
measure and final measure of the copy source.
* When attempting to copy many measures at one time, the
message "No More Memory!" may be displayed, and you may
not be able to copy the data. In this case, you can copy the data
by dividing the measures to be copied into smaller sections,
and repeating the copy procedure as many times as is needed.
7. Press [ENTER].
The copy-destination designation screen appears.
fig.RE04-27
Starting measure
8. Specify the measure for the copy destination.
Turn [VALUE] to specify the starting measure. The final
measure is determined automatically by the number of
measures in the copy source.
9. Press [ENTER].
The copy confirmation screen appears.
Destination Song
category / number
Relevant Track