Boss JamStation JS-5 Owner's Manual page 107

CHO DLY (Chorus
This effect connects a chorus and a delay in series.
fig.RE07-135
Balance D
L in
Balance E
Chorus
Balance E
R in
Balance D
CHO PREDLY (Chorus Pre delay) 0.0–100 ms
Specify the time delay from the original sound until the
chorus sound is heard.
CHO RATE (Chorus Rate) 0.05–10.0 Hz
Specify the modulation frequency of the chorus sound.
CHO DEPTH (Chorus Depth) 0–127
Specify the modulation depth of the chorus sound.
CHO BAL (Chorus Balance) D100:0E–D0:100E
Specify the volume balance between the original sound and
the chorus sound.
With a setting of D100:0E only the original sound will be
output, and with a setting of D0:100E only the chorus sound
will be output.
DLY TIME (Delay Time) 0.0–500 ms
Specify the time delay from the original sound until the delay
sound is heard.
DLY FB (Delay Feedback) -98–+98%
Specify the proportion (%) of the delay sound that is to be
returned to the input.
Positive (+) settings will return the sound to the input with
the original phase, while negative (-) settings produce an
inverted phase.
DLY HF (Delay HF Damp) 200–8000 Hz, BYPASS
Specify the frequency at which the high frequency range of
the delayed sound returned to the input will be cut.
If you do not want the sound to be cut, select BYPASS.
DLY BAL (Delay Balance) D100:0E–D0:100E
Specify the volume balance between the chorus sound that
passes through the delay and the chorus sound which does
not pass through the delay.
With a setting of D100:0E only the chorus sound will be
output, and with a setting of D0:100E only the chorus sound
that passes through the delay will be output.
LEVEL (Output Level) 0–127
Specify the output volume.
Delay)
L out
Balance D
Balance E
Delay
Balance E
Feedback
R out
Balance D
Chapter 7 Changing Effect Settings
FL DLY (Flanger
This effect connects a flanger and a delay in series.
fig.RE07-136
Balance D
L in
Feedback
Balance E
Flanger
Balance E
R in
Balance D
FL PRE DLY (Flanger Pre delay) 0.0–100 ms
Specify the time delay from the original sound until the
flanger sound is heard.
FL RATE (Flanger Rate) 0.05–10.0 Hz
Specify the modulation frequency of the flanger sound.
FL DEPTH (Flanger Depth) 0–127
Specify the modulation depth of the flanger sound.
FL FEEDBACK (Flanger Feedback) -98–+98%
Specify the proportion (%) of the flanger sound that is to be
returned to the input. Positive (+) settings will return the
sound to the input with the original phase, while negative (-)
settings produce an inverted phase.
FL BAL (Flanger Balance) D100:0E–D0:100E
Specify the volume balance between the original sound and
the flanger sound.
With a setting of D100:0E only the original sound will be
output, and with a setting of D0:100E only the flanger sound
will be output.
DLY TIME (Delay Time) 0.0–500 ms
Specify the time delay from the original sound until the delay
sound is heard.
DLY FB (Delay Feedback) -98–+98%
Specify the proportion (%) of the delay sound that is to be
returned to the input. Positive (+) settings will return the
sound to the input with the original phase, while negative (-)
settings produce an inverted phase.
DLY HF (Delay HF Damp) 200–8000 Hz, BYPASS
Specify the frequency at which the high frequency range of
the delayed sound returned to the input will be cut.
If you do not want the sound to be cut, select BYPASS.
DLY BAL (Delay Balance) D100:0E–D0:100E
Specify the volume balance of the flanger sound that passes
through the delay and the flanger sound which does not pass
through the delay.
With a setting of D100:0E only the flanger sound will be
output, and with a setting of D0:100E only the flanger sound
that passes through the delay will be output.
Delay)
L out
Balance D
Balance E
Delay
Balance E
Feedback
R out
Balance D
107